Powerful Surface Pumps
Up to 70 PSI and 50 GPM
Enter your delivery zip code
Contact RPS for custom shipping timelines for Alaska, Hawaii and Puerto Rico.
Enter a 5-digit US ZIP code.
Enter your delivery zip code
Contact RPS for custom shipping timelines for Alaska, Hawaii and Puerto Rico.
Enter a 5-digit US ZIP code.
Up to 70 PSI and 50 GPM
Fast, quiet and ready to plug into any 110V or 220V outlet. No external pressure tank required, as the Eco-Steady Booster Series creates pressure on its own! Water for every appliance in the house including ...
When a faucet or irrigation node opens, the RPS Eco-Steady Booster pumps ramps up to match the flow rate and pressure required. Use the built in timer or pair your own irrigation timer for handsfree, automatic watering schedules.
Installation usually takes a few hours. You don't need any special tools or knowledge, putting together the inlet plumbing is considered the most complicated part. You'll want the pump to be as close as possible to the water source, maximum about 20 feet away. And the final step is to prime the pump with water, there's an easy to reach hole above the inlet that you'll pour water into. Priming preps the pump to help remove air pockets.
Yes! The Eco-Steady Booster Pump line was designed with energy efficiency in mind. Each pump operates on a range of power that starts on the low end, say if you only open one faucet, and increases power as your needs increase, if that faucet was open and then someone started taking a shower. You'll never use more power than needed for each part of your day.
If you have an existing pump that doesn't supply sufficient pressure or flow to your house, usually this is because the pump is either a) old and starting to break down or b) too far away from the house/destination for the water, and is not properly sized for the job you need it to do. An Eco-Steady Booster Pump is not right for a direct in-line application, meaning its placed somewhere along the existing pipeline and attempts to bump the pressure from whatever the existing pump can provide. But if you place a storage tank along the pipeline and allow the Eco-Steady to booster from the tank, you'll be really pleased with the consistent flow and pressure you'll receive!
We wanted a tough, programmable pump that could preform everyday tasks without the need for a pressure tank. Pressure tanks contain a diaphragm that breaks down over time, which results in water line pressure loss (aka weak showers). Plugging in an Eco-Steady powers up a hardy centrifugal booster pump that varies its speed and power based on your demand for water, at the exact pressure you select.
Our goal is to arm you with the equipment and knowledge to take control of your water and save a fistful of money doing it. RPS Eco-Steady are for every kind of home and farmer – from small gardens to large farms and households.
You can install yourself in a single afternoon. No scheduling expensive installers and having them get lost. No strangers walking around your land. Pump while enjoying peace and quiet at the same time.
Peace of mind knowing RPS engineers are ready to pick up the phone if you need us. Industry-Leading Warranties and the RPS Water Assurance Plan to make sure you have the right pump, parts, and tools for a fast and easy install.
SKILLS NEEDED
