Skip to content
Get Quick Online Water Pump Sizing Now »
Get Quick Online Water Pump Sizing Now »
20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps 20% OFF All Well and Booster Pumps

One and Done Well Drop Poly Pipe Kit for Easy Well Pump Install

NOTE: You must choose a pump separately that fits your specific project, this kit DOES NOT include a pump

Save 40% Save 37%
Original price $878.99
Original price $797.99 - Original price $3,828.00
Original price $878.99
Current price $553.99
$553.99 - $2,333.99
Current price $553.99
One and Done Pipe/Rope/Wire Length: 100 foot(1" poly pipe)
Plumbing Options: 4inch Well Seal Assembly
Shipping, Returns and Warranty

Ultra Fast Shipping

We know how crucial getting water to your property is - that's why we offer FREE SHIPPING with every order over $100, which should arrive to your doorstep within 3-5 business days anywhere in the contiguous USA.

2-Year System Warranty:

Rural Power Systems Inc. (RPS Water Pumps) warrants to the owner for a period of twenty-four (24) months from the date of purchase (“Warranty Period”) such RPS Products will be free from material defects in material and workmanship. During the Warranty Period, RPS Water Pumps will repair or replace any defective part(s) at no cost to the owner. Learn More.

What does our Water Assurance Guarantee mean?

We offer a money back guarantee that our pump systems will provide you water when sized by one of our engineers to your well, desired setup and final total dynamic pumping head. We do require static water levels, drawdown and pressure requirements are accurately estimated during the sizing process, that installation follows the instructions of the RPS User Manual, and that you give RPS engineers a chance to troubleshoot any issues.

Returns

Customer shall inspect the RPS Product within 30 days of receipt and will be deemed to have accepted the RPS Product unless you notify RPS Water Pumps of your intent to return the product. You may return the RPS Products purchased, for any reason, for a full refund up to thirty (30) days after the date of purchase. The RPS Products must be unused, in new condition, and you must pay the return shipping or return to product to RPS Water Pumps in person. For your convenience, we are happy to email printable shipping labels and deduct the cost (often a discounted rate vs. retail store rate) from your refund amount.

After 30 days and up to sixty (60) days after purchase, a full refund is not available, but transferrable store credit is available for returned products. Unfortunately, we do not accept returns past 60 days and are unable to offer refunds, however, your product warranty is transferable in event the system is sold during the Warranty Period.

As a condition of this return policy, you agree to give us the opportunity to troubleshoot the issue(s) with the RPS Product to work out any issues prior to return.

Free Shipping on Orders $100+

Need a Pump ASAP? 2nd Day Air Available

Rather a Friendly Voice? Not Sure on Sizing?

Our famous support team is here to help! Call us at 855-560-5670

Kits Made for DIYers

Short on time? In a remote area without access to a hardware store? Get everything you need to install an RPS Water Pump right to your doorstep, thats why we call it the One-and-Done, one click and you're done shopping! 

Step 1) Choose between 100, 200 or 300 foot lengths for your wire, pipe and rope.

Step 2) Determine whether you need the 1" poly pipe (up to 15 GPM) or the 1.25" poly pipe (15-25 GPM). If you need the 200 or 300 foot One and Done length, and want higher GPM, but you're unsure which pipe diameter will work for you - either use a frictional loss calculator or call one of our technicians who will make the calculation for you and recommend a pipe diameter 855-560-5670

Step 3) Then choose between a Well Seal Assembly or a Well Cap/Pitless Adapter. Measure your well casing diameter to determine which size Well Seal or Well Cap to select. 

We recommend the 1" One-and-Done kits for pumps from the 05RPS, 07RPS, and 10RPS series. That means the GPM rate is roughly between 5-15GPM. If you're purchasing a pump flow rate higher than 15G GPM, like the 13RPS, 18RPS and 25RPS, you'll need the larger pipe diameter 1.25" One-and-Done.     

The outlet of the 05RPS, 07RPS, 10RPS, 13RPS, 18RPS and 25RPS series are 1.25 inch. For the 1" One and Dones, we've already accounted for the reduction in plumbing size needed to fit to a 1" pipe with the parts included.   

One-and-Done kits include...

Wire

Pump Wire - Outer jacketed (12-3+G AWG for 100 and 200 for kits, 10-3+G AWG for 300 foot kits).  UL Listed per UL 83 Type THW as Deep Well Submersible Pump Cable. Operating temperature range -40° C to 75° C. Annealed bare stranded copper conductors. 

Waterproof Splice Kit for connecting pigtail off pump to rest of pump wire 


Plumbing

Poly Pipe rolls 160psi  (1" IPS) or  250psi(1.25" IPS). Both are NSF 14/61 Rated for Potable Drinking Water MADE IN THE USA 

Check Valve Assembly 1.25" stainless threaded coupler, 1.25" stainless check valve, 1.25"stainless hose barb(for 1.25" poly pipe kits) or 1.25"--> 1" reducing stainless hose barb (for 1" poly pipe kits), and stainless hose clamps.

If you choose the Well Seal Option... 

Well seal assembly (4", 5", 6", 8") with stainless steel well seal, 1.25" stainless threaded nipple, 1.25" stainless threaded tee, 1.25" hose barb (for 1.25" poly pipe kits) or 1.25"--> 1" stainless coupler + 1" stainless hose barb ( for 1" poly pipe kits), and stainless hose clamps for the barbed coupling. 

If you choose the Pitless Adapter option...

Well Cap (4", 5", 6" or 8")

1" stainless steel hose barb and 1" Pitless Adapter Assembly (for 1" poly pipe kits) or 1.25" stainless steel hose barb and 1.25" Pitless Adapter Assembly (for 1.25" poly pipe kits)


Additional Parts

Poly-braid no-rot safety rope, marine grade, submersible rated 3/8" diameter, 2,450lb tensile strength

Teflon tape

Electrical tape

 

Tools & Equipment you’ll still need on hand for the quick install:

Wire stripper/crimper

Flat and Phillips Screwdriver

Lighter or heatgun for heatshrinks, heating poly pipe for tighter hose clamps

Small socket set as it helps get hose clamps tighter

Simple Multimeter for testing voltages  

***If you are here from our sister company RPS Solar Pumps, this One and Done Kit is made to fit with AC well pumps, and is not interchangeable with the solar pump Turnkey Kit*** 

 

NEXT GEN WELL CARE

3X Longer Lifetime than traditional cast iron

BEFORE
AFTER

⭐ ⭐ ⭐ ⭐ ⭐

"Replaced my seized up-rusty-iron well seal with an RPS-High quality-SS-Well Seal. My wellhead now shines like a new silver dollar."

91%

said they felt their well is in better shape now than before installing stainless plumbing

Info On Well Seals 

Auxiliary hole for wiring

Rubber gasket expands for tight fit

Compatible with 1" to 1-1/4" drop pipe

SEE BELOW FOR HELP WITH SIZING

4" well seal: 1-1/4"* main through hole, 3/4" NPT auxiliary conduit hole, 1/2" NPT vent

5" well seal: 1-1/4"* main through hole, 1" NPT auxiliary conduit hole, 1/2" NPT vent

6" well seal: 1-1/4"* main through hole, 1" NPT auxiliary conduit hole, 1/2" NPT vent

8" well seal: 1-1/4"* main through hole, 1" NPT auxiliary conduit hole, 1/2" NPT vent

 

*For 1-1/4" plumbing, actual diameter opening 1.70".  Use reducing couplers when using 1in drop pipe.

 

Note on Varying Well Casing Sizes for Well Seals 

Depending on the material of lining used, varying pipe sizes and the age of the well our engineers have observed that all 6" wells sometimes do not all have the exact same measurements. This holds true for 4", 5" and 8" wells too. A 2-year-old 6" well in Indiana may not have the exact same measurements as a 6" 65-year-old well in Texas. Not to worry! The black gasket around the bottom of RPS stainless steel well seals will swell with exposure to water to help seal off slight inconsistencies in measurements. In rare cases, you can also add some foam tape around the gasket for a more exact fit on wells with "unique" measurements. And as long as the lip of the well seal is sitting over the well casing, you well pump will be safely supported.   

  

Our Pledges to You

  1. Be a company our Grandfathers would have trusted. The trend of ‘outsourcing’ customer support after the sale is a trend we wholeheartedly oppose. We are an American, family run company and our USA engineers support you before and after the sale.
  2. No sales pressure. Ever. Nobody in the company is paid on commission. We think this is important. Their role is to make sure they find the right pump for you and your well. If we don’t have a livestock solar pump that will suit your needs, we will help you find a solution elsewhere. Our job is to help get you water.
  3. Reliable Water. All manufactured products have occasional issues and we can’t claim to be perfect. However, we are proud of a near perfect track record in getting our customers water. This starts with selling a pump sized for your usage with our Water Assurance Plan and promptly addressing warranty issues to get you up and pumping again quickly.
  4. Give you the power! When you control your ability to pump water out of the ground, whether that is in the field or at home, it makes you more resilient and independent. We are here to help educate you about solar water pumping for livestock and our systems over the phone, with our manual - so you can install yourself. Take control of your water supply today.
  5. Fight for the American rancher. RPS is a David & Goliath story of a small American company fighting against a big European pump corporation that cares more about profits then the longevity of their pumps and the sky-high price for ranchers. Thanks to all our customers for the support of small business vs. foreign corporations trying to profit off some of the hardest working people in our great nation.

-The RPS Team

Customer Reviews

Based on 19 reviews
89%
(17)
0%
(0)
5%
(1)
5%
(1)
0%
(0)
W
William Kaizer (Buffalo Grove, US)
One and done kit

Kit had everything I needed to make for an easy pump install.

D
Deborah

Just what I was looking for!

L
Levi Ortmann (Milwaukee, US)
Quality components but incorrect parts

Quick delivery and quality stainless steel components. Our issue with the 4” pitless adapter one and done kit was improper sizing. These style pitless adapters will not work/physically fit within a 4” well casing. Frustrating that a 4” pitless kit is sold as it won’t work. We ended up using part of the kit (piping, some barb fittings) but had to order a different type of pitless adapter from another manufacturer in order to work with a 4” well.

A
Armando Clara (Monroe, US)

One and Done Kit for Easy Well Pump Install and One-Click Shopping

F
Forrest simmons (Federal Way, US)
100 Foot "one and done" kit

After receiving multiple ridiculous quotes to replace my failed well pump I decided to tackle the project myself. I selected a one and done kit from RPS which included everything I needed from the well cap down. I saved over $5000 and it only took a few hours to install. I highly recommend it to anyone who is confident in their abilities.

J
Jeffrey McGuffin
Easy Install

Install was a breeze. Especially with 2 people. Very Straightforward instructions.

T
Thomas Irizarry (Virginia Beach, US)
Well kit

I ordered the wrong kit I don’t have a solar well the cap might be to big I’ll have to contact you for possible exchange

C
Chase Harding (Quincy, US)
Quality parts

Very nice materials and all set

R
Robin Meza (Riverside, US)

As a 65 year old woman and my 29 year old daughter were able to put this pump in by ourselves, anyone can do it. Ryan was so very kind and helpful. We need more people like in in our world.

J
Jon Williams (Huntington, US)
More to it

First off installing a 1 HP pump 300 ft. Deep is definitely a two man operation. As the pump descends you are holding ever more weight. At the end the weight exceeds 100 lbs. The wire provided was high quality with a thick jacket. I used three rolls of tape, you provided one. The wire compression connectors were rediculously small? The well cap was cheap with no o ring. I don't understand why you cheap out on these inexpensive items. If just one the leads loses connection the pump needs to come out? Crazy